Follow these steps for a successful installation of your HexaSpace Hexagon LED lights:
Step 1: Assemble the Border (if applicable)
1. Assemble on Floor
• Lay out all the border pieces on the floor. If your Hexagon LED lighting system includes a border, start by assembling the straight border pieces. If there is no border, skip to Step 3.
2. Connect Border Pieces
• Use the straight and 90-degree elbow connectors to join the tubes together. Ensure each tube is fully inserted into each end of the connector piece. Build the entire border first.
3. T Connector
• On the last corner of the border, use a T connector. This will later connect the border to the power supply.
Step 2: Construct the Hexagon Pattern
1. Layout
• Lay out the pieces of the Hexagon pattern on the floor. Begin with one corner, forming your first hexagon.
2. Connect Hexagons
• Use two-way elbow and three-way connectors to assemble the hexagons. Place the three-way connectors in positions where they will later connect to the next hexagon.
Step 3: Build the Columns
1. Column Construction
• Continue building the hexagons in the same column as specified in your instruction manual until you reach the total number of columns.
2. Repeat Process
• Construct the next full column of hexagons and repeat the process for each subsequent column.
Step 4: Join Columns
1. Join Columns
• Use the remaining tubes to join all columns together horizontally, forming the complete Hexagon pattern.
Step 5: Mounting
1. Mount Border
• If your Hexagon includes a border, mount it first on the ceiling or wall using the mounting holes in each connector piece.
2. Mount Hexagon
• Mount the entire Hexagon pattern in the same manner.
Step 6: Plug In and Play
1. Connect Power
• Once the Hexagon is assembled and mounted, plug in the power adapter to a standard outlet.
2. Enjoy Your Lighting
• Your HexaSpace Hexagon LED lighting system is now ready to use, providing bright and efficient illumination for your space.
